1. The material will roll radial and axial under the rotating pendulum vibration of the reaction chamber to ensure uniform heating of the material and adequate contact with the gas to prevent overburning and entraining caused by static sintering;

2. High purity Al2O3 fiber refractory insulation material, excellent insulation effect, reduce the power consumption of equipment;

3. Adopt advanced dynamic sealing device to ensure that the equipment can be used in vacuum and atmosphere;

4. The product uses automatic control mode, equipped with 7-inch touch screen real-time tracking display device status;

5. The furnace body can be tilted to -4-15°, which is convenient for customers to take and discharge materials;

Model

NBD-RT1700-100T2D2Z

Electrical Spec

三相380V 50HZ   9KW

Tmax

1700℃ 

Max working temps.

1650℃ 

Heating rate

≤  20℃/min

Heating rate

400mm

Tube material

310S (φ80, φ100mm optional), corundum furnace tube (φ60, φ80mm optional)

Furnace structure

The furnace can be opened, and the φ100mm and φ80mm tube diameters can be changed according to the different furnace tubes used, and the rotation function can be realized, the speed is 0-12.6r/min.

Control system

1, sintering process curve setting: dynamic display setting curve, equipment sintering can prestore multiple process curves, each process curve can be set freely;
2, can be booked sintering, unattended sintering process curve sintering;
3, real-time display of sintering power and voltage information and record sintering data, and can be exported to achieve paperless record;
4, with remote control, real-time observation of equipment status;
5. Temperature correction: the difference between the main control temperature and the sample temperature, and the whole sintering process is nonlinear correction.

Temp Accuracy

+/- 1 ℃

Heating element

High purity silicon molybdenum rod

Sealing system

Pressure measurement and monitoring

The mechanical pressure gauge with damping oil can prevent the pressure gauge pointer from being damaged. At the same time, the pressure sensor can accurately display the internal force change of the furnace tube in real time

Gas supply system  

The two-channel mass flowmeter control system can accurately control the intake volume

Net weight

450KG

Safety function

1. With overtemperature alarm, broken couple prompt, leakage protection, etc.;

2. Electromagnetic pressure relief valve, overpressure automatically deflate;

3. Emergency stop button to prevent misoperation and protect personnel and equipment.

Optional function

Remote monitoring:

1. Real-time viewing of sintering curve and alarm information;

2. Remote operation including start-stop heating, start-stop vacuum system, modification process, etc.

Cautions

1. When the furnace temperature of the equipment is greater than or equal to 300℃, it is forbidden to open the furnace to avoid injury;

2. When the equipment is in use, the pressure inside the furnace shall not exceed 0.125MPa (absolute pressure) to prevent the pressure from bursting the sealing flange;

3. The device is recommended to handle micron powder or granular sample, and it is not recommended to use this product for nano powder.

Service

One year limited warranty with lifetime support (the warranty does not cover consumable parts such as furnace tubes and seals).