Release time:2022-07-05 Number of views:364
|
Equipment introduction:
|
Configuration
NO. |
Type |
Equipment technical index |
1 |
Furnace size |
Approx.Φ330*368 |
2 |
Cavity size |
Approx.Φ160*368 (The thickness of the refractory insulation layer is 60mm, and the thin is contrary to the thermal principle, and the customer has been informed that it will cause the appearance of overheating, the heating rate is too slow, the power is too large, and the heating element life is short. |
3 |
Heating rate |
Recommended lower than 10℃/min |
4 |
heating element |
Domestic 1800 high purity silicon molybdenum rod U-shape spacing 25mm Hot Φ4*140+ cold Φ9*110mm 6 PCS (customer needs to confirm) |
5 |
maximum power |
3KW working voltage 48V working current 65A (customer needs to confirm, the power is small) |
6 |
Furnace material |
1800 alumina fiber insulation refractory |
7 |
Temp. Accuracy |
±1℃ |
8 |
Furnace mode |
Vertical (open) through hole Φ40mm |
9 |
Control mode |
7" true color touch screen control, intelligent fuzzy PID control, Chinese and English exchange overheating and broken pair protection |
10 |
Temperature curve setting |
Each curve can be set 30 sections of "time-temperature curve"; |
11 |
Temperature curve recording |
Real-time monitoring, dynamic real display of "time-temperature curve" |
12 |
thermocouple |
Type B thermocouple |
13 |
way to install |
The bench post of the testing machine is connected through the joint arm |
Disclaimer:
The product introduction content of this site (including product pictures, product descriptions, technical parameters, etc.) is for reference only. There may be some difference between the stated content and the actual situation due to the delay in updating. Please contact our customer service staff for confirmation. The information provided by this Site does not constitute any offer or acceptance. NOBODY will improve and modify any information on this site from time to time without prior notice.
Related products
|
|
|
|
|
|
|
|