1, the equipment is mainly composed of furnace body, lifting system, mechanical transmission system, intake and exhaust system and other parts;

2, the furnace body includes the furnace body frame, metal furnace tube, refractory module, heating element, lifting device and other parts;

3, the lifting system by a DC 24V electric push rod to complete the tilt of the upper frame and furnace body, can hover at any Angle within the range of -5 ~ +15 degrees, its thrust is 8000 N. The adjustment of furnace Angle is controlled by the dip meter and the lifting and descending angles are controlled by the limit switch. Can be stopped at any Angle at any time;

4, furnace body drive for chain drive, safe and reliable. The transmission system is composed of the main drive motor and reduction unit, chain, sprocket, front supporting wheel mechanism, etc. The reducer is 51K120A-CF single-phase motor with a power of 0.12KW. The furnace tube speed can be adjusted within 1 ~ 3 RPM as required to realize continuous rotation.

5. Both ends of the rotary furnace body are reserved for dynamic and static transition rotary joints. The inlet end of the furnace tail is provided with pipe brackets, stainless steel pipes, ball valves, etc., and protective gas is passed into the furnace when the materials are calcined as required. The rotary head on the furnace door is connected with a ball valve and a pagoda nozzle, which can adjust the opening of the ball valve according to the size of the air discharge when the material is calcined to control the gas discharge;

6. The control box is located in the lower frame of the furnace body, and the electric components such as air switch and power modulator block are integrated in the electric control box. The controller is located in front of the furnace body, through the operation of the controller panel, can be prefabricated into a curve, fully automatic heating, to realize the rotating operation of the heating furnace tube and the tilt of the heating furnace body, in order to facilitate the flow of materials.

Electrical Spec

NBD-RT1200-325T33D2F

K-type 450mm

φ309～L1250mm

8mm

310S stainless steel

21KW

0.12KW

0.25KW

3-phase 380V/50Hz

30~1100℃

Single temperature and three controls

≤±1℃

Digital touch PID control

-5 to 15 degrees adjustable

Adjustable from 1 to 3 RPM

2-channel mass flowmeter intake (2MFC)

Control system

1. Sintering process curve setting: dynamic display setting curve, equipment sintering can prestore multiple process curves, each process curve can be set freely;
2. Can be booked sintering, unattended sintering process curve sintering;
3. Real-time display of sintering power and voltage information and record sintering data, and can be exported to achieve paperless record;
4. It can realize remote control and real-time observation of equipment status;
5. Temperature correction: the difference between the main control temperature and the sample temperature, and the whole sintering process is nonlinear correction.

Partial interface

Service

One year limited warranty to provide lifelong support.