Release time:2022-07-14 Number of views:762
|
Equipment introduction:
|
|
|
Configuration
|
Safety guide
|
|
Model |
NBD-GTS0.5L(low temperature) |
|
boundary dimension |
200L*400H*200D |
|
Temp Accuracy |
±0.5℃ |
|
Temperature control range |
RT~100℃ |
|
Rated power |
AC220V/300W |
|
Function |
Timing, heat up |
|
Injection cavity |
304 stainless steel quick flange, effective volume 500mL |
|
Vacuum degree of injection chamber |
<3pa |
|
Heating medium volume |
1700mL |
|
protection |
Protection against dry burning |
|
Suitable evaporative material |
Suitable for all kinds of liquids evaporated under atmospheric pressure and vacuum; |
|
air inlet |
Φ8.3 Pagoda mouth |
|
air outlet |
Φ8mm polytetrafluoroethylene (can be directly connected to the temperature hole to enter) | |
Pressure display |
CSilicone rubber inlet pipe 1.5m, PTFE outlet pipe 0.5m, 1 power cord |
|
|
|
|
|
|
|
The product introduction content of this site (including product pictures, product descriptions, technical parameters, etc.) is for reference only. There may be some difference between the stated content and the actual situation due to the delay in updating. Please contact our customer service staff for confirmation. The information provided by this Site does not constitute any offer or acceptance. NOBODY will improve and modify any information on this site from time to time without prior notice.