Ultra-high temp. heating furnace 2000℃-Ultra-high temp furnace-高温炉生产厂家

EXPERIENCE CENTRE

Service Centre

Tel： 0371-6320 2801
0371-6320 2805
Sale Service： 0371-6320 2805
Duty Manager：
MR. CAI： 181 0371 5723
Email ： nbd@nbdkj.com

Customer visits Current Location：Home > Customer visits

Ultra-high temp. heating furnace 2000℃

Release time：2020-06-19 Number of views：3541

		Equipment introduction: The vacuum furnace body is composed of the furnace body, the furnace cover and the related accessories installed on it, the furnace cover lifting mechanism, the bottom frame, etc. The furnace cover has a uniform double-layer water cooling structure, the inner layer is made of non-magnetic stainless steel plate, and the outer layer is made of stainless steel. The furnace cover is equipped with imported two-color infrared thermometer, safety valve, pressure sensor, armored thermocouple interface, air charging valve, pressure vacuum meter, electromagnetic vent valve, handrail, etc., which is easy to operate. The furnace body is equipped with explosion-proof device, thermocouple interface for temperature measurement, and interface for power intake and vacuum pipe. The lifting mechanism of the furnace cover completes the action of opening and closing the furnace cover up and down. The action is driven by the hydraulic jack, and the smooth opening is realized by the manual.

Configuration

	1. The double-layer air-cooled structure greatly reduces the surface temperature of the shell; 2. Equipped with a three-dip 4-baked graphite heater with excellent acid and corrosion resistance; 3. The use of graphite cotton felt made of refractory insulation material, small heat loss, help to reduce the use of equipment power; 4. Large sintering space, can be used for industrial production; 5. Touch screen operation, intuitive display of temperature curve;
Model	NBD-HR2000-80TI		NBD-HR2000-120TI	NBD-HR2000-160TI			NBD-HR2000-200TI
Electrical Spec	AC380V 22KW	AC380V 35KW			AC380V 40KW			AC380V 70KW
Tmax	1800℃				1800℃
Heating rate	≤20℃/min
Chamber size	Φ80*100mm		Φ120*150mm		Φ160*200mm		Φ200*300mm
Control system						1.NBD-101EP embedded operating system English and Chinese interchangeable graphical interface, 7 inch true color touch screen input, intelligent man-machine dialogue mode, real-time heating power display, non-linear pattern temperature correction; The experimental report is generated independently, and the experimental data is exported unlimited times. 2. 15 curves can be pre-stored, and 30 "time-temperature" nodes can be set for each curve, eliminating the process of repeatedly modifying curves; 3. It has the functions of over-temperature alarm, broken couple warning, leakage protection and so on.
Temp Accuracy	+/- 1℃
Heating element
	Excellent acid and corrosion resistance of graphite heater/tungsten molybdenum heater
Cautions	1, always pay attention to the temperature of the furnace cover, furnace body, furnace bottom and water-cooled electrode, can not be hot, otherwise to stop heating, check whether the water is smooth. 2, if the vacuum degree is not pumped, it should be checked whether the oil in the diffusion pump is oxidized, and whether the mechanical pump is aging, such as aging should be replaced in time. 4, when filled with protective gas, attention should be paid to the value of the vacuum pressure gauge, which can not exceed the positive pressure (generally 2-3 cells below 0 and about -50Pa, the furnace is still negative pressure). It should be noted that the gas has the characteristics of thermal expansion, if close to the positive pressure, you can open the mechanical pump and pre-extraction valve to remove part of the gas. 5, when loading, be sure not to touch the graphite heating body (saw seam), because the heating body is fragile after burning, causing unnecessary losses. 6, usually should pay attention to the furnace, outside the furnace cleaning, vacuum valve maintenance work. 7, after opening the water pump should pay attention to check whether each valve is fully opened, and the connected water pipe without dripping phenomenon, if any should be eliminated in time.
Service	1 year warranty with lifetime support (warranty does not cover consumable components such as furnace tubes and seals).

Disclaimer:

The product introduction content of this site (including product pictures, product descriptions, technical parameters, etc.) is for reference only. There may be some difference between the stated content and the actual situation due to the delay in updating. Please contact our customer service staff for confirmation. The information provided by this Site does not constitute any offer or acceptance. NOBODY will improve and modify any information on this site from time to time without prior notice.

Previous article：3000℃ ultra-high temperature atmosphere furnace

下一篇：没有了