Release time:2024-08-07 Number of views:27
|
Equipment Profile:
|
||
|
|
|
配置详情:
|
Equipment Features:
|
|||||||
Type of equipment |
NBD-CHR1700-27TI |
|||||||
Electrical Specifications |
Three-phase 380 V; 50HZ (can match local electricity demand) |
|||||||
Maximum temperature |
1650℃ |
|||||||
Rated power |
12KW | |||||||
Temperature measuring element |
Type B thermocouple | |||||||
Heating temperature zone size |
340*300*400mm |
|||||||
Furnace body size | L2300 * D1100 * H1680mm | |||||||
Temperature control accuracy |
±1℃ |
|||||||
Recommended heating rate |
≤8℃/min |
|||||||
Touch Screen Operating System Features |
1. Sintering process curve setting: dynamic display setting curve, equipment sintering can save a number of process curves, each process curve can be set freely;
2. Sintering can be scheduled to achieve unattended sintering process curve sintering; 3. The information of sintering power and voltage can be displayed in real time and the sintering data can be recorded, which can be exported to realize paperless recording. 4. Remote control and real-time observation of equipment status; 5. Temperature correction: the difference between the master control temperature and the sample temperature, the whole sintering process is nonlinear corrected. |
|||||||
Detachable special-shaped insulation door block |
|
|||||||
Process control interface |
|
|||||||
Data saving interface |
|
|||||||
Air Cooled / Water Cooled Moments |
|
|||||||
Net Weight |
Approx. 200KG |
|||||||
Service Support |
One Year Limited Warranty with Lifetime Support (Consumable Parts Excluded) |
|||||||
Maintenance Considerations |
★ When the stove is used for the first time or does not need to be used again for a long time, it should be baked at about 300 ° C for 2 hours before use. Normal sintering furnace temperature should not exceed the rated temperature, so as not to damage the heating elements and lining.
|
Related Products
|
|
|
|
|
|
|
|
Disclaimer:
Site product introduction content (including product pictures, product descriptions, technical parameters, etc.), for reference only. May be due to the update is not timely, may lead to the content and the actual situation there is a certain difference, please contact the company's customer service personnel to confirm. The information provided on this site does not constitute an offer or acceptance, and Norbadi may improve and modify any information on this site from time to time without prior notice.