Constant temperature thermal fatigue testing machine
Release time: 2023-01-14 10:03:32 Number of views: 487
Equipment introduction:
The water bath system of the constant temperature cold and thermal fatigue testing machine is based on the low temperature constant water cooling circulation machine, which can ensure the stability of the water temperature in the set state, and can automatically replenish water according to the water level. Customized water bath protective cover can effectively prevent the leakage of rust residue, so as not to affect the normal operation of the water bath circulation system.
Configuration：
| 1, the control system adopts advanced PLC+ touch screen control system, the operation is more simple and convenient. The control mathematical model adopts advanced PID self-learning fuzzy control to keep the temperature control accuracy at ±1℃. 2, built-in conventional and constant temperature two test modes, improve the test accuracy and test efficiency; | |||||||
| Model | NBD-LT1200-100TI | |||||||
Electrical Spec | triphase 380V;50HZ | |||||||
Tmax | 1200℃ | |||||||
rated power | 6KW+0.7KW | |||||||
thermocouple | Type K thermocouple (450mm, 1300mm) | |||||||
heating-zone size | Ø240×220mm | |||||||
| Pull rod material | 310S stainless steel | |||||||
Temp Accuracy | ±1℃ | |||||||
Control system |
1. Sintering process curve setting: dynamic display setting curve, equipment sintering can prestore multiple process curves, each process curve can be set freely; 2. Can be reserved sintering, to achieve unattended sintering process curve sintering; 3. Real-time display of sintering power and voltage information and record sintering data, and can be exported to achieve paperless recording; 4. With remote control, real-time observation of equipment status; 5. Temperature correction: the difference between the main control temperature and the sample temperature, the whole sintering process is nonlinear correction. | |||||||
Furnace size | L1075×D613×H2150mm | |||||||
Recommended heating rate | 10℃/min | |||||||
| Main monitoring interface |  | |||||||
| Data saving interface |  | |||||||
partial picture |
| |||||||
net weight | Approx.200KG | |||||||
Service | One year limited warranty with lifetime support (warranty does not include consumable parts) | |||||||
Disclaimer:
The product introduction content of this site (including product pictures, product descriptions, technical parameters, etc.) is for reference only. There may be some difference between the stated content and the actual situation due to the delay in updating. Please contact our customer service staff for confirmation. The information provided by this Site does not constitute any offer or acceptance. NOBODY will improve and modify any information on this site from time to time without prior notice.
推荐产品
Φ95×50mm corundum crucible
Vacuum molten salt electrolysis furnace
Vertical eight channel high-throughput tube furnace
well-type furnace G1700-300TI
Automatic feed and feed hydrogen absorption sintering furnace
Medium denture waxing furnace
Constant pressure vacuum rotary pendulum sintering furnace
Automatic hydrogen making machine H300
- {{item.cat}}
- {{item2.cat}}
- {{ isExpanded[index2] ? 'Retract' : 'More' }}
Phone: 400-000-3746
0371-6320 2805
After-sales service： 0371-6320 2805
MR. CAI： 181-0371-5723
Mr.Gao: 188-3829-0747
Ms.Huang: 188-3829-0748
Email ： nbd@nbdkj.com
Address：8# zhuyuan, Xinhua subdistrict, Xinzheng, Zhengzhou, China