Release time:2022-10-11 Number of views:348
|
Equipment introduction:
|
||
|
|
|
|
|
|
|
Configuration
|
1. Desktop design, easy to move and operate;
|
||
Model |
NBD-B1600-12TI |
||
Electrical Spec |
AC220V 2.5KW |
||
Tmax |
1550℃ |
||
bottom-loading |
|||
Heating rate |
≤20℃/min |
||
Chamber size |
Φ120*150mm |
||
Control system |
|
1. Can pre-store 15 denture sintering curves of various manufacturers, call at will. Each curve can be set 30 sections of "temperature-time" axis, avoiding the trouble caused by the repeated setting of different experimental processes;
|
|
Temp Accuracy |
+/- 1℃ |
||
Heating element |
|
Special high density silicon carbon heating element |
|
Net weight |
60KG |
||
Cautions |
If you want to sinter zirconium disks soaked with dye, be sure to dry the zirconium disks completely and then put them into the equipment for sintering to extend the service life of the equipment. |
||
Service |
1 year warranty with lifetime support (warranty does not cover consumable parts such as furnace tubes and seals). |
Disclaimer:
The product introduction content of this site (including product pictures, product descriptions, technical parameters, etc.) is for reference only. There may be some difference between the stated content and the actual situation due to the delay in updating. Please contact our customer service staff for confirmation. The information provided by this Site does not constitute any offer or acceptance. NOBODY will improve and modify any information on this site from time to time without prior notice.
Related products
|
|