Heat resistant material test furnace
Release time: 2022-05-25 07:27:38 Number of views: 665
Equipment introduction:
The equipment integrates the control system and the furnace. The furnace lining is made of vacuum forming high purity alumina poly light material, and HRE high temperature alloy wire is used as the heating element. It is a special supporting equipment specially developed for research institutes to test the thermal insulation characteristics of thermal insulation refractories.
The external communication interface can be used independently as a sintering furnace, and can be connected to the external control system to realize the temperature point test of each layer. The control panel is equipped with an intelligent temperature regulator and a control power switch to observe the working state of the system at any time.
| Equipment introduction:
| ||
|
|
| |
|
|
| |
Configuration
| 1. Use contactless thyristor module to improve the stability of system control; | |||||
Model | NBD-G1200-15TI（square cavity） | |||||
Electrical Spec | AC220V 3.5KW | |||||
Tmax | 1100℃ | |||||
| Thermocouple type | K-Thermocouple | |||||
Heating rate | ≤20℃/min | |||||
Dimensions | L400*D445*H640mm | |||||
Control system |
| 1. Fuzzy PID temperature control, high light digital tube display; | ||||
Temp Accuracy | +/- 1℃ | |||||
Heating chamber |
| |||||
| Chamber size | 150*150*150mm | |||||
| sample size | L180*W180*H(20--110 adjustable)mm | |||||
| Test material stationary state |  | |||||
Net weight | Appr. 30KG | |||||
Cautions | 1. Slight cracks caused by continuous use of the furnace are normal and do not affect the normal use of the equipment; | |||||
Service | 1 year warranty with lifetime support (warranty does not cover consumable components such as furnace tubes and seals). | |||||
Disclaimer:
The product introduction content of this site (including product pictures, product descriptions, technical parameters, etc.) is for reference only. There may be some difference between the stated content and the actual situation due to the delay in updating. Please contact our customer service staff for confirmation. The information provided by this Site does not constitute any offer or acceptance. NOBODY will improve and modify any information on this site from time to time without prior notice.
Related products
|
|
|
|
|
|
|
|
- {{item.cat}}
- {{item2.cat}}
- {{ isExpanded[index2] ? 'Retract' : 'More' }}
Phone: 400-000-3746
0371-6320 2805
After-sales service： 0371-6320 2805
MR. CAI： 181-0371-5723
Mr.Gao: 188-3829-0747
Ms.Huang: 188-3829-0748
Email ： nbd@nbdkj.com
Address：8# zhuyuan, Xinhua subdistrict, Xinzheng, Zhengzhou, China