1. The furnace body heating adopts ring arrangement to reduce interference; 2. The weighing sensor made of precious metal nickel-chromium alloy has the advantages of high temperature resistance, oxidation resistance and corrosion resistance;
3. The power supply, circulation heat dissipation part and the host are separated to reduce the impact of heat and vibration on the micro-heat sensor;
4. Adopt the upper electric lifting structure, easy to install and operate;
5. Water bath constant temperature device is used to isolate the thermal influence of heating furnace body on the chassis and micro-thermobalance.

Model

Vacuum atmosphere vertical quenching furnace NBD-LT1500/1700-80TI

Main function

1. In the process of heating, constant temperature or cooling, it can automatically record the change curve of sample temperature, vacuum degree, gas flow rate and time;
2. Measure and study the following properties of materials: thermal stability, adsorption and desorption, quantitative analysis of components, moisture and volatiles, decomposition process, oxidation and reduction, effects of additives and fillers, reaction kinetics.

Electrical Spec

AC380V 12KW

Tmax

1200 ℃/ 1500 ℃/ 1700 ℃（optional）

Heating rate

≤  20 ℃/min

Length of heating zone

400mm

Furnace tube material

Quartz tube or corundum tube

Accuracy of load cell

0.01g(Other precision can be selected)

Control system

1. Temperature curve setting: 15 temperature curves can be pre-stored, each of which can be set to 30 sections of "temperature-time" curve;
2. Control mode: PLC realizes automatic control of transmission mechanism, temperature module, ventilation and vacuum pumping;
3.NBD-101E embedded operating system Chinese and English interchangeable graphical interface, 7 inch true color touch screen input, intelligent man-machine dialogue mode, real-time heating power display, non-linear pattern temperature correction;
4. Data interface: USB data interface, support data export U disk and online printing;
5. Transmission mechanism: the stepper motor drives the ball screw to drive, which is more stable and easier to load and unload materials;
6. Data recording method: automatic storage according to the set time interval;

Temp Accuracy

+/- 1 ℃

Sealing system

Vacuum degree: ≤10Pa(mechanical pump)

Pressure measurement & monitoring

The mechanical pressure gauge with damping oil is used to make the pressure fluctuation produce damping and reduce the pointer swinging back and forth.

Gas supply system

Built-in gas mass flowmeter, including two gas switching and flow size control.

Net weight

350KG

Cautions

1. When the furnace temperature of the equipment is ≥300℃, do not open the furnace to avoid damage;
2. When the equipment is used, the pressure in the furnace tube shall not exceed 0.125MPa (absolute pressure) to prevent damage to the equipment caused by excessive pressure;
3. When used under vacuum (10 to the minus 3 Pa), the use temperature of the equipment shall not exceed 800℃.

Service

1 year warranty with lifetime support (warranty does not cover consumable components such as furnace tubes and seals).