Solid state battery pressure insulation mold set
Release time: 2020-04-12 13:40:30 Number of views: 5178
The solid state battery test mold is used to test the characteristics of solid state batteries. The insulated mold can be fixed in the glove box by using the transfer fixture, pressed to the suitable pressure in the tablet press, tightened the screws above the fixed mold, and carried out pressure relief. Finally, the transfer fixture and the insulation mold are removed and tested together.
The solid state battery test mold is used to test the characteristics of solid state batteries. The insulated mold can be fixed in the glove box by using the transfer fixture, pressed to the suitable pressure in the tablet press, tightened the screws above the fixed mold, and carried out pressure relief. Finally, the transfer fixture and the insulation mold are removed and tested together.
|
Model |
Item |
schematic diagram |
L*H*D（mm） |
Effective space size （mm） |
|
Solid state battery pressure clamp set |
Four column large fixture |
|
100*100*160mm high for use on a 30 ton tablet press |
Effective space diameter 60*130 |
|
Three pillars round fixture |
|
Diameter 100*155mm(height) for use on a 30 ton tablet press |
Effective space diameter 60*130 |
|
|
Three column small round fixture |
The diameter of 90*120mm(high) is used in the tablet press under 30 tons |
Effective space diameter 50*100 |
||
|
Three-column three-layer fixture (with pressure sensor) |
Diameter 90*148mm(H) |
 |
||
|
Supporting insulation mold 10mm |
Total height 80mm |
Low mold (custom) suitable for 90*120mm diameter (height) fixture |
|
|
|
Supporting insulation mold 12mm |
Total height 80mm |
Low mold (customized) suitable for 90*120mm diameter (height) fixture |
|
|
|
|
Total height 120mm mold |
|
||
|
Supporting insulation mold 12mm |
Total height 120mm mold |
|
||
|
Supporting insulation mold 16mm |
Total height 120mm mold |
|
||
|
solid state battery |
Detachable battery measuring device |
|
Common test size: 16mm,20mm |
|
Disclaimer:
The product introduction content of this site (including product pictures, product descriptions, technical parameters, etc.) is for reference only. There may be some difference between the stated content and the actual situation due to the delay in updating. Please contact our customer service staff for confirmation. The information provided by this Site does not constitute any offer or acceptance. NOBODY will improve and modify any information on this site from time to time without prior notice.
推荐产品
Ultra-high temp. vacuum atmosphere sintering furnace
Rf independent system
Insulation mold pressure test system
Industrial annealing sintering furnace
- {{item.cat}}
- {{item2.cat}}
- {{ isExpanded[index2] ? 'Retract' : 'More' }}
Phone: 400-000-3746
0371-6320 2805
After-sales service： 0371-6320 2805
MR. CAI： 181-0371-5723
Mr.Gao: 188-3829-0747
Ms.Huang: 188-3829-0748
Email ： nbd@nbdkj.com
Address：8# zhuyuan, Xinhua subdistrict, Xinzheng, Zhengzhou, China