Equipment function:
The controller is designed with two main functions: heating and valve control;
1. The program has designed 5 sets of control functions for the heating belt, which communicate with the temperature control meter provided by the customer through PLC, and perform functions such as starting, stopping, temperature setting, parameter setting, temperature display, and status display for the heating belt (corresponding changes can be made according to the customer's temperature control meter model). And designed alarm functions such as overheating of the temperature control meter, thermocouple disconnection, real-time alarm recording, historical alarm recording, large temperature difference of the temperature control meter, and communication interruption.
2. This system is designed with automatic and manual control functions for 10 sets of pneumatic valves.
Can control valve opening and closing, operating time, operating cycle, remaining operating time, fully open, fully closed, automatic and manual locking functions, maintain status, etc
Technical parameters:
Temperature control accuracy: ± 1 ℃
Touch screen size: 10 inches
Rated voltage: single-phase 220V
Rated power: 1KW
Communication mode: Modbus
Number of connected stations: ≤ thirty-two
Valve control time: ≤ 500min
Number of pneumatic valves: ≤ ten
Usage environment:1) The relative humidity of the surrounding environment shall not exceed 85%;
2) There are no conductive dust, corrosive gases that severely damage metal and insulation materials around the equipment;
3) The foundation has no obvious tilt, vibration, or bumps;
Disclaimer: The product introduction content on this website (including product images, product descriptions, technical parameters, etc.) is for reference only. Due to delayed updates, there may be some discrepancies between the content and the actual situation. Please contact our customer service personnel for confirmation. The information provided on this website does not constitute any offer or commitment. Nuobadi Company may periodically improve and modify any information on the website without prior notice.