Configuration details
Glove box + series products
| Equipment features:
1. Simple: humanized design operation window
2. Intelligent HMI man-machine interface, easy operation;
3. Safety: high sealing fully protects the safety of the person and the sample;
4. High efficiency: integrated design to improve equipment efficiency; Energy saving: frequency conversion control operation.
5. Heating, pressure and other heat treatment equipment can be modified according to customer requirements;
|
| Major component
1. Main container
2. Purification system
3. Solvent system
4. Water cooling
5. Large transition cabin
6. Small transition pods
7. Control system
|
|
Control system
1. Cycle: start, stop circulation purification system;
2. Real empty pump: start and stop vacuum pump;
3. Lighting: turn on and take care of the light;
4. Analyzer: control water oxygen analyzer;
5. Cleaning: Set the details of cleaning parameters;
6. Tacit recognition value: restore the default value set by the system;
7. Alarm Settings: set water oxygen alarm tips;
8. Settings: alarm Settings and box leak detection Settings, English and Chinese switch;
9. Regeneration: press the regeneration key to control the purification column for regeneration;
10. Time setting: preset touch screen display time;
11. Records: Query system operation records and water oxygen content records;
|
| Transition cabin construction
1. Support frame; 2. Support rod; 3. Large hatch cover; 4. Large cabin shaft;
5. Large transition cabin beam; 6. Handle; 7. Lead rod 8. Hook;
9. Vacuum pressure gauge;
10. Small hatch door;
11. Small hatch door handle
12. Three-way ball valve;
|
| Replacement of activated carbon
① vacuum meter; ② three-way ball valve; ③ feeding port; ④ discharge port;
Specific replacement process:
1. Close the two butterfly valves above the solvent column (butterfly valve ② and butterfly valve ③ in 10.2);
2. Check whether ① (vacuum gauge) is under normal pressure. If it is vacuum, supplement air to normal pressure through ② (three-way ball valve)
3. Open ③ (feeding port) and ④ (discharging port);
4. Activated carbon flows out from ④ (discharge port); Tighten the clamp after cleaning;
5. Pour clean and dry activated carbon from ③ (feeding port); After installation, tighten the clamp;
6. Through the operation of ② (three-way ball valve), vacuum and replenish the solvent column three times.
7. Repeat 5.11.2 to flow the circulating gas through the solvent column.
|
Electrical Spec | AC220V 1.5KW |
Preparation and inspection before use
| 1. Prepare sufficient high purity working gas (please refer to Table 1 for gas specifications)
2. Prepare two 40L cylinders of recycled gas (refer to Table 2 below for gas specifications)
3. Two pairs of decompression tables (one is used under normal circumstances, the other is used for regeneration)
application | Clean the box, balance the pressure and work gas | Gas type | Nitrogen, argon or helium | purity | 99.999% H2O ≤5ppm； O2 ≤5ppm | quantity | Meet the equipment work needs | Need pressure | 0.4-0.6MPa | Pressure relief gauge range | Main gauge pressure range >15MPa; Sub-surface pressure range ≤ 1MPa | connecting pipe | Material: Plastic; Outer diameter: ￠10mm; Inside diameter: ￠6.5mm; | Table 1 High purity working gas |
application | Reduction purification column purification capacity | Gas type | When nitrogen is used as the working gas, nitrogen/hydrogen mixture (90-95% N2, 5-10% H2) is used;
When argon is used as the working gas, argon/hydrogen mixture (90-95% Ar, 5-10% H2) is used;
When helium is the working gas, a helium/hydrogen mixture (90-95% He, 5-10%H2) is used.
| purity | 99.999% H2O ≤5ppm； O2 ≤5ppm | quantity | Each purification column requires 3500L or close to 40L cylinder 10MPa pressure gas | Need pressure | approx. 0.01-0.03MPa | Pressure relief gauge range | Main pressure range >10MPa; Sub-surface pressure range < 0.5MPa | connecting pipe | Material: Plastic; Outer diameter: ￠10mm; Inside diameter: ￠6.5mm; | Table 2 Regenerated gases |
|
caution | 1. Personnel shall not use the glove box without training;
2. Prohibit the use of materials that can poison the regeneration catalyst, such as: sulfhydryl compounds;
3. Do not use volatile solvents that will damage plexiglass, such as acetone, without permission;
4. Contact the person in charge to remove the water probe before using volatile solvents;
5. Open the activated carbon circulation system when using volatile solvents;
6. When using the glove box, do not have long nails, do not wear sharp objects (such as: watches, jewelry, etc.).
|
Disclaimer:
The product introduction content of this site (including product pictures, product descriptions, technical parameters, etc.) is for reference only. There may be some difference between the stated content and the actual situation due to the delay in updating. Please contact our customer service staff for confirmation. The information provided by this Site does not constitute any offer or acceptance. NOBODY will improve and modify any information on this site from time to time without prior notice.
