Large bell jar sintering furnace
Release time: 2020-04-11 05:12:52 Number of views: 2343
Easy to operate, programmable, PID self-tuning, automatic heating, automatic heat preservation, automatic cooling, no need to be on duty; Can be equipped with another computer communication, through the computer operation electric furnace (start electric furnace, stop electric furnace, pause heating, set heating curve, heating curve storage, history curve, etc.)
Double-layer furnace shell, the furnace body by fine spray corrosion resistance acid and alkali resistance, the furnace body and the furnace isolated by air cooling, shell surface temperature is less than 45 °C.
Energy-saving: the furnace is made of imported fiber, high temperature resistance, rapid heat and cold resistance, good insulation performance.
Fast heating (adjustable heating rate from 1C / h to 40C / min)
Double loop protection (over temperature, over pressure, over current, off couple, power off, etc.)
Silent electronic relay
Standard digital PID controller, can adjust the heating curve, holding temperature and holding time.
Over-temperature alarm and power off, earth leakage protection, safe and reliable operation.
| Product introduction | 1600 °C series bell jar furnace, high quality, excellent performance | |
| Applicable temperature range | The suitable temperature for this type of electric furnace is 600 °C ~ 1600 °C | |
| Product Purpose | Widely used in ceramics, metallurgy, electronics, glass, chemical industry, machinery, refractory materials, new materials development, special materials, building materials and other fields of production and experiment. | |
| Main features | Easy to operate, programmable, PID self-tuning, automatic heating, automatic heat preservation, automatic cooling, no need to be on duty; Can be equipped with another computer communication, through the computer operation electric furnace (start electric furnace, stop electric furnace, pause heating, set heating curve, heating curve storage, history curve, etc.) Double-layer furnace shell, the furnace body by fine spray corrosion resistance acid and alkali resistance, the furnace body and the furnace isolated by air cooling, shell surface temperature is less than 45 °C. Energy-saving: the furnace is made of imported fiber, high temperature resistance, rapid heat and cold resistance, good insulation performance. Fast heating (adjustable heating rate from 1C / h to 40C / min) Double loop protection (over temperature, over pressure, over current, off couple, power off, etc.) Silent electronic relay Standard digital PID controller, can adjust the heating curve, holding temperature and holding time. Over-temperature alarm and power off, earth leakage protection, safe and reliable operation. | |
| Technical parameters | Best working temperature | 1600℃ |
| Continuous operating temperature | 1550℃ | |
| Temperature control system | PID programmed temperature control | |
| Operating voltage | AC 380V/50HZ | |
| Heating element | Molybdenum silicon rod | |
| Temperature control accuracy | ± 1℃ | |
| Heating rate | 20°C / min | |
Refractory material | 高纯氧化铝纤维板 | |
| Heating element | Molybdenum silicon rod | |
| Customers can choose | 1, crucible, sagger, corundum furnace pad / silicon carbide pad 2, computer control software and hardware 3, touch screen control temperature controller 4, increase the exhaust port 5, supplies: heating elements 6, increase the observation port | |
| Note | 1, in order not to affect the service life of the furnace, we recommend the maximum heating rate and cooling rate of 10-20C / min, (high temperature heating too fast heating element life will be shortened). 2, this equipment without vacuum sealing structure, can not pass into flammable and explosive gas. 3, it is not recommended to enter the corrosive gas, if you want to enter the strong corrosive gas containing S, Na, please inform in advance, we will carry out special treatment on the furnace. 4, can not leak high temperature solution to the bottom of the furnace, to avoid the program can be used plate or alumina powder isolation. 5, the instrument should be placed in the air circulation, not humid place. | |
| Temperature measuring element / temperature measuring range | B scale thermocouple (double platinum rhodium) | |
| Optional accessories | Alumina crucible, Computer control software, Movable furnace frame, Pad brick, Paperless recorder, etc. | |
| Warranty period | One year warranty period, lifetime maintenance, except related consumables, such as heating elements, thermocouples and other consumable parts. | |
Customer Selection | Can support non-standard custom, welcome to call 400-000-3746 | |
Disclaimer: The product introduction of this site (including product pictures, product descriptions, technical parameters, etc.) is for reference only. May be due to the update is not timely, may lead to the content and the actual situation there is a certain difference, please contact the company's customer service personnel to confirm. The information provided on this site does not constitute an offer or acceptance, and Norbadi may improve and modify any information on this site from time to time without prior notice.
推荐产品
Insulation mold pressure test system
.jpg)
3000℃ ultra-high temperature atmosphere furnace
.png)
MiNi wax removal prefiring furnace
Rotary tube sintering furnace (Tmax1700℃)
- {{item.cat}}
- {{item2.cat}}
- {{ isExpanded[index2] ? 'Retract' : 'More' }}
Phone: 400-000-3746
0371-6320 2805
After-sales service： 0371-6320 2805
MR. CAI： 181-0371-5723
Mr.Gao: 188-3829-0747
Ms.Huang: 188-3829-0748
Email ： nbd@nbdkj.com
Address：8# zhuyuan, Xinhua subdistrict, Xinzheng, Zhengzhou, China