1. The material will roll radial and axial under the rotating pendulum vibration of the reaction chamber to ensure uniform heating of the material and adequate contact with the gas to prevent overburning and entraining caused by static sintering;
2. High purity Al2O3 fiber refractory insulation material, excellent insulation effect, reduce the power consumption of equipment;
3. Adopt advanced dynamic sealing device to ensure that the equipment can be used in vacuum and atmosphere;
4. The product uses automatic control mode, equipped with 7-inch touch screen real-time tracking display device status;
5. The furnace body can be tilted to -5-30°, which is convenient for customers to discharge materials.

Model

NBD-RT1200-200T2

NBD-RT1200-200T3

Electrical Spec

AC380V    12KW

AC380V    18KW

Tmax

1200 ℃

Max working temps.

1100 ℃

Heating rate

≤  20 ℃/min

Heating length

600mm

900mm

Tube size

Control system

1.NBD-101E embedded operating system English and Chinese interchangeable graphical interface, 7 "true color touch screen input, intelligent man-machine dialogue mode, non-linear pattern temperature correction;

2. The experiment process is more intuitive and the operation is more convenient;

3. It has the functions of overtemperature alarm, broken couple prompt, leakage protection and so on.

Temp Accuracy

+/- 1 ℃

Heating element

Mo-doped Fe-Cr-Al alloy

Sealing system

Vacuum degree: ≤10Pa (mechanical pump)

Pressure measurement and monitoring

The mechanical pressure gauge with damping oil is used to produce damping when the pressure fluctuates and reduce the pointer to swing back and forth.

Gas supply system

Float flowmeter is used to control the flow rate of gas, integrated with the equipment, and the leakage test has been carried out before leaving the factory.

Net weight

60KG/120KG

Cautions

1. When the furnace temperature of the equipment is greater than or equal to 300℃, it is forbidden to open the furnace to avoid injury;

2. When the equipment is in use, the reading of the absolute pressure gauge should not be greater than 0.15MPa to prevent equipment damage caused by excessive pressure.

3. The device is recommended to handle micron powder or granular sample, and it is not recommended to use this product for nano powder;

4. When used in vacuum, the operating temperature of the equipment shall not exceed 800℃.

Service

1 year warranty with lifetime support (the warranty does not cover consumable parts, such as furnace tubes and sealing rings).