1.Material in the furnace tube constantly turning, heat evenly, fully contact with the reaction atmosphere, to ensure that the material full reaction；

2.High purity Al2O3 fiber refractory insulation material, excellent insulation effect, reduce the power consumption of equipment；

3.Advanced dynamic sealing device is adopted to ensure that the equipment can be used in vacuum and atmosphere；

4.Products use automatic control mode, equipped with 7 inch touch screen real-time tracking display device status；

5.The furnace body part can achieve -5-30° tilt, convenient for customers to discharge the material operation；

Product model

NBD-RT1200-300T33

Electrical specification

AC380V    21KW

Accessible temperature

1200 ℃ （1 hour）

Continuous temperature

1100 ℃ （continuous）

Heating rate

≤  20 ℃/minutes

Length of heating zone

900mm

Tube size

Control system

1.Adopt automatic control mode, touch screen real-time display device data；

2.The experiment process is more intuitive and the operation is more convenient；

3.It has the functions of over temperature alarm, breaking even prompt, leakage protection and so on。

Temperature accuracy

+/- 1 ℃

Heating element

Mo-doped Fe-Cr-Al alloy

Sealing system

Vacuum degree：≤10Pa（Mechanical pump）

Pressure measurement and monitoring

The mechanical pressure gauge with damping oil is used to produce damping when the pressure fluctuates and reduce the pointer to swing back and forth.

Air supply system

Float flowmeter is used to control the flow rate of gas, integrated with the equipment, and the leakage test has been carried out before leaving the factory.

Net weight

800KG

Precautions for device use

1.Equipment furnace temperature ≥300℃，Do not open the furnace to avoid injury；

2.When the equipment is in use, the pressure inside the furnace shall not exceed 0.125MPa (absolute pressure)，To prevent equipment damage caused by excessive pressure；

3.The equipment is recommended to handle micron powder or granular samples，Nano powder is not recommended to use this product；

4.When used under high vacuum (10 to the minus 3 Pa)，The operating temperature of the equipment shall not exceed800℃。

Service support

1 year warranty with lifetime support (The warranty does not include consumable parts, such as furnace tubes and sealing rings)。