The overall structure of the equipment adopts the manual push and pull of the internal and external pipes, air intake on the left side, air out on the right side, and the incoming and outgoing materials are on the right side.The right flange adopts the quick-opening flange of the spring lock, which is very convenient to operate. The inner tube adopts the inclined corundum tube, and is equipped with corundum pieces for the placement of materials. The furnace lining is made of vacuum formed high purity alumina lightweight material, and the heating element is made of imported high temperature silicon molybdenum rod.

The high purity corundum tube traverses the middle of the furnace body. Both ends of the furnace tube are sealed with stainless steel flanges. The heating element is parallel with the furnace tube, which effectively ensures the uniformity of the temperature field. The temperature is measured by the "B" thermocouple with stable performance to improve the accuracy of temperature control. The control panel of the furnace body is equipped with a seven-inch LED touch screen, the operation interface is simple and convenient, so as to observe the working state of the system at any time.

Model

NBD-CVD1700-80I+TZ

Tmax

1700℃

Temp Accuracy

±1℃

Thermocouple type

B type length:205mm

Recommended heating rate

≤10/min

1, sintering process curve setting: dynamic display setting curve, equipment sintering can prestore multiple process curves, each process curve can be set freely;
2, can be booked sintering, unattended sintering process curve sintering;
3, real-time display of sintering power and voltage information and record sintering data, and can be exported to achieve paperless record;
4, with remote control, real-time observation of equipment status;
5. Temperature correction: the difference between the main control temperature and the sample temperature, and the whole sintering process is nonlinear correction.

Gas system（optional）

Type of flowmeter

float flowmeter

mass flowmeter

Pipeline diagram

Number of inlet ports

2、3、4（Multi-channel optional）

flow range

20-200/60-600l/min(Multi-range option)

50/100/200sccm(Multi-range option)

Range of working pressure difference

0-0.15MPa

Low vacuum system (optional)

Vacuum pump type

NBD-1.5C

NBD-3C

NBD-4C

pumping rate

1L/s

3L/s

4L/s

Inlet and exhaust port dimensions

Φ8mm Pagoda-Shape Connector

Φ8mm Pagoda-Shape Connector

KF16/25

ultimate pressure

1000Pa

100Pa

10Pa

operating temperature

5-40℃

Specifications

AC220V

分子泵高真空系统

（可选购）

Molecular pump system model

NBD-103(A)

NBD-103(B)

NBD-103(C)

pumping rate

110L/s

600L/s

700L/s

vacuum gauge

Composite vacuum gauge

ultimate pressure

10^-3Pa

10^-4Pa

10^-5Pa

operating temperature

5-40℃

Electrical Spec

AC 220V

AC 220V

AC 380V

* Support non - calibration, more models, welcome to call 400-000-3746