After cleaning the spinneret, assemble: 1. Before installing the spinneret head, the joint surface between the spinneret and the touch head must be checked to ensure that there is no foreign matter. 2. The screws must be coated with high-temperature grease that can withstand a temperature of more than 350. , 3. Tighten the screws in steps from the middle to both sides. ... Please enter for more information

Setting of cleaning and sintering curve of spinneret: A Vacuum sintering: 1. The vacuum degree of the cleaning furnace should reach 100 ~200Pa during sintering, and the temperature should rise from room temperature to 350℃ in 60 minutes. The vacuum will start when the temperature reaches 100℃; ... Enter into detail 2. Keep warm at 350℃ for 1 hour. 3. Raise the temperature from 350℃ to 450℃ for another 30min. 4. Keep the temperature at 450℃ for 2 hours. 5. When the temperature in the furnace is less than 100℃, open the intake valve at the temperature and let the furnace.

It's April 20, 2020, and the COVID-19 pandemic is still very serious abroad. In China, the epidemic has gradually been brought under control, and more and more enterprises have resumed work.

Click Contact after-sales engineers Tel:86+0371-63202905

Dear Nobadi users, 2019, thank you for your support and trust all the way In 2020, we will strive to provide you with better products and services The company will have a holiday from 2020.1.23 (the 29th day of the 12th lunar month) to 2020.2.1 (the 8th day of the 1st lunar month), and officially go to work on the 9th day of the 1st lunar month Keep the phone open during the holiday. If you have any questions, please feel free to contact me The number is 400-000-3746 Mobile Phone: 18838290748 (same as wechat) On the occasion of the coming New Year, Huang Qiaowen wishes you and your family a happy New Year, good health and happiness!

NOBODY sincerely invites all friends to visit and exchange!